Request info
TELL US YOUR NEED AND SEND YOUR REQUEST
Technical support

Compare models

ORTIS EssentialORTIS ProORTIS Enterprise
Robot TypeABB 6-Axes
6 kg (13 lbs) Payload on the Wrist Working Area Approximately 1000 mm (3 feet)
ABB 6-Axes or KUKA 6-Axes
20 kg (44 lbs) Payload on the Wrist Working Area Approximately
1600 mm (5 feet)
ABB 6-Axes or KUKA 6-Axes
40-60 kg (88-132 Ibs) Payload on the Wrist Working Area from 2.000 to 2.500 mm
(6 feet to 8 feet)
Seventh Interpolated Axis Aluminium Turntable450 x 450 mm (18”x18”)
Working Plate, 60 rpm
System Integrated in Containment Box
700 x 700 mm (28”x 28”) Working Plate, 60 rpm700 x 700 mm (28”x 28”) Working Plate, 60 rpm
380V Three-Phase Electro Spindle1.0 KW
24.000 rpm
Auto Cooling System
Up to ER20 Collect (Tool Shank Diameters from 2 to 12 mm) Manual Tool Change
3.6 KW
24.000 rpm
Fan-Cooling
Up to ER30 Collect (Tool Shank Diameters from 3 to 20 mm) Manual Tool Change
4.0 KW
24.000 rpm
Fan-Cooling
ISO30 Tool Holders (Tool Shank Diameters from 2 to 20 mm) Automatic Tool Change
Presetting LaserLaser Device Automatically Measures the Tool LengthLaser Device Automatically Measures the Tool LengthLaser Device Automatically Measures the Tool Length
Tool Box10-position toolbox for ISO30 Tool Holders The robot deposits the holder with the actual tool in the box and automatically takes the new required tool.
Work AreaProcesses blocks up to:

· Corsets - Diam. 600x(H)1000 mm

· AFO / KAFO - 350x200x(H)650 mm

· SEATING SYSTEMS - 500x600x(H)350 mm
Processes blocks up to:

· Corsets - Diam 800x(H)1200 mm

· AFO / KAFO - 350x300x(H)1000 mm

· SEATING SYSTEMS - 800x800x(H)800 mm
Processes blocks up to:

· Corsets - Diam 1200x(H)1500 mm

· AFO / KAFO - 350x300x(H)1500 mm

· SEATING SYSTEMS - 1200x1200x(H)1200 mm
DimensionsThe Complete System:
The Robot Controller is
housed in an aluminum box,
prearranged for chip suction.
The dimensions are:
1700 length x 1250 width x 2450 height mm (6 feet length x 4 feet width x 8 feet height)
Installation on Industrial Floor Minimum Area:
3000 x 3000 x 2700 mm
(10 feet x 10 feet x 9 feet)
Additional Area for Robot Control Unit: 1000 x 1000 x 2000 mm
(3 feet x 3 feet x 7 feet)
To increase the productivity, you can install more than one turntable/ xed table around the robot
Installation on Industrial Floor Minimum Area:
4000 x 4000 x 3000 mm
(13 feet x13 feet x 10 feet)
Additional Area for Robot Control Unit: 1000 x 1000 x 2000 mm
(3 feet x 3 feet x 7 feet)
To increase the productivity, you can install more than one turntable/ xed table around the robot
WeightA total of about 600 kg (1300 Ibs)Robot with its own base:
550 kg (1200 lbs)
Turntable: 270 kg (600 lbs) Control unit: 250 kg (550 lbs)
Robot with its own base:
650 kg (1500 lbs) * Turntable: 270 kg (600 lbs) Control Unit: 250 kg (550 lbs) Tool Box: 280 kg (625 lbs)
Power Supply 380 VAC Three-Phase 50-60 Hz **6 KVA
(average consumption 1.5 KW)
12 KVA
(average consumption 4.5 KW)
15 KVA
(average consumption 5.5 KW)
Noise Level<75 dB<75 dB on a typical installation<75 dB on a typical installation
Compressed AirOptional, at least 3 barMinimum 6 barMinimum 6 bar

Would you like to receive more information or support about our robotic solutions?

Tell us about your production and we will adapt them to your needs!

Request information Technical support

Request information








    I consent to the processing of data according to the privacy policy

    Request support











      I consent to the processing of data according to the privacy policy